$0.00
One general purpose motor with direct mount hydraulic pump for operation on 220/440 volts, 3 phase, 60 hertz, with 110 volt control circuit (please specify voltage).
| Models | Bending Length | Capacity Mild Steel | Capacity Stainless Steel | Motor HP | Shipping Weight | Dimensions | |
|---|---|---|---|---|---|---|---|
| HBPU 1010-6 | 120" | 10 GA | 14 GA | 5 | 8800 lbs | 160" x 48" x 72" | |
| HBPU 1012-6 | 120" | 12 GA | 16 GA | 5 | 6900 lbs | 150" x 48" x 57" | |
| HBPU 1014-6 | 120" | 14 GA | 18 GA | 2 | 5500 lbs | 150" x 48" x 57" | |
| HBPU 810-6 | 96" | 10 GA | 14 GA | 5 | 6400 lbs | 126" x 48" x 57" | |
| HBPU 812-6 | 96" | 12 GA | 14 GA | 3 | 4700 lbs | 125" x 48" x 57" | |
| HBPU 612-6 | 72" | 12 GA | 16 GA | 2 | 3300 lbs | 102" x 48" x 54" | |
| HBPU 412-6 | 48" | 12 GA | 16 GA | 2 | 2800 lbs | 78" x 48" x 54" |
Electric Foot Switch – Clamps and unclamps Top Leaf. Allows operator mobility when loading and unloading material.
Bend Angle Dial Adjustment – Adjustable cam and scale that read in degrees, actuates an electric limit switch for bend angle control and repeatability of bends.
Material Thickness Dial Adjustment – Reference scale for speedier set up when adjusting clamping pressure.
Back Gauge – 25 1/2″ travel, rack and pinion type gauge with hand wheel adjustment on right side of machine. Inch/Cm scales.
Optional: Power Back Gauge with digital readout – electric push button operation.
Inch Control – Bending leaf up/down pushbuttons allow complete operator control of the bending leaf motion.
Automatic Cycle – Actuating the “Automatic Pushbutton” clamps the top leaf, raises the bending leaf to the preset bend angle dial adjustment setting, lowers the bending leaf, unclamps the top leaf.
Please note that the specifications shown on the Dreis & Krump website may change without notice. Always contact a sales professional on our staff for current specifications.
Copyright © 2025. All Rights Reserved.
Website Design by The Inertia Group
